Skip navigation

Tag Archives: fine silver jewelry

P1420599_0054_edited-1

Amethyst on spaceship lentil bead necklace.

 

P1420600_0055_edited-1

 

Sage leaf textured three leaves with tiny blossom and stem bail

 

P1420601_0056_edited-1

 

Fluid ring necklace that goes with absolutely everything.

 

P1420602_0057_edited-1

 

Dragon scale earrings with wildly colorful patina and the long ear wire style.

 

P1420603_0058_edited-1

Zebra stripes and purple pearls

 

P1420604_0059_edited-1

 

Old cartography texture with colorful patina and darling purple pearls

 

P1420605_0060_edited-1

This is not a great picture of these.  Hearts with texture of an old love letter in french and larger rounded ear wires.

As many of you already know, I have been making dogwood inspired jewelry for a long while now in honor of the fact that they were a favorite flower of my mother and in making these I honor her memory.  I love doing these and I love the way some of you have connected with the pieces, either because of my story or because you have your own reasons to love dogwoods.  Many of you have shared those with me and it has been a joy and an inspiration.  I noticed however that I have not posted a recent photo of any of them.  So in correcting that omission, here are some recent pieces.

ThreeDogwoodnecklace-1

 

Three dogwoods on a woodgrain backing with a cultured pearl.  This is one of the more elaborate pieces I have done.

dogwoodnecklace1

 

This piece has a lovely warm patina and is similar to many that I have hand sculpted.  I have used many different textural elements for the centers, this one is a blossom texture plate.

 

dogwoodearrings_dangle-1

 

This is a simple earring design I do with dogwoods that has a radial center and little stem like handles to hold the flowers on the dangle wires.

 

asiandogwoodearringswithpearls

 

This pair of earrings is from my hand detailed texture plates.  This one is an oriental dogwood with the pointed petals and is adorned with button cultured pearls and heavily patinated.

flowerRingsept13

 

Above is a fine silver floral ring that uses sage leaf molds I made from my own garden grown sage for the texture.  I have been thinking a lot about rings lately.  I love the challenge of ring making.  Below is a ring that is quite complex.  It contains a square shaped element that is constructed of copper and bronze which is riveted to a fine silver ring along with a hand lamp worked glass bead and a little silver disc to protect the glass during the riveting.  I will be at the Gazebo Art Festival in Macomb this Saturday to display these and many more.  The fair runs from 9am to 5pm and is Saturday only.

 

copperbronzesilverringwblueglass

oceanripplesboxearrings

I have a couple of truly unbelievable items in my kiln right now and since it is hard to photograph things that are glowing hot I thought I would show you these earrings inspired by ocean waves lapping the beach.  They are fine silver box earrings with argentium sterling silver wires and cultured pearls.  You can see them in person at the Art on the Promenade this weekend in East Peoria.  The fair is a new one and is being held from 10 to 5 both days at the new Target complex.  I believe there will be about 40 artists there and I feel honored to be among such fantastic company so come check the fair out and see all of the new stuff going on in that part of East Peoria.  The new clock tower building looks almost finished.

PHartfair2013poster600

This weekend is Mother’s Day weekend.  As usual, the Peoria Heights Art Fair is on Saturday along with Race for the Cure.  I hope to see all of you local folks there!  I have some lovely goodies I am in the process of photographing so check back over the next couple of days for that also!

earinenvelopeI will be displaying my work at Ear in the Envelope Friday May 3rd from 6pm to 9pm.  Ear in the Envelope is located at 820 SW Adams St, Peoria 61602, Enter through the Alley from Adams to Oak St to May St.  Liz Barnes, owner of Ear in the Envelope, has invited a number of jewelry artists for this First Friday event.  There will be nibblies and live music as well.  Come join us for a lovely evening!  I have quite a number of new items to show you when you stop by!

Many of you have seen and admired the butterflies I have been making.  A customer wondered if I could make a dragonfly and certainly they are beautiful insects that capture our imagination.  I have made three so far.  The photo above is the largest of the three.  I am very pleased with the result.  This is a super busy time for me what with my son being home for the summer and art fair season being in full swing.  I have made so many pieces that have sold before I had a moment to photograph them!  I took a few shots this morning.  Below is another butterfly with a sleek body and head.

I recently had some photos taken by a professional photographer, Kevin May, who lives here in Peoria.  I was overawed at his setup and enjoyed a chance to see how he went about everything. Hopefully I can use some of what I learned to take better photos for this blog.

This ring is fine silver with a purple CZ set in a tube.  I learned quite a bit from creating the tube setting from metal clay.  The stone sits ever so slightly off from level post firing.  I do not believe the angle of the stone is all that noticeable but I am after all a perfectionist.  I have no good ideas about how to prevent another stone from shifting during firing.  The setting involves two metal clay tubes of different diameter.  After both tubes were perfected I sanded the bottom edges into a slight curve so that they would sit nicely onto the curved ring band.  The inner tube acts as a seat for the stone and the outer stone captures the stone.  I sanded the top edge of the outer tube to bevel it so that after firing I could press it down a bit to create a neat look.

The ring size shrank quite a bit so I sanded out the edges of the box to make them flush with the inner band, which is a design change and which gained the ring over a whole size.  I was shooting for size 7 so I had cut the sides as a size 9 and then after drying and sanding smooth they were about a size 9.25 so I was very happy with this but post firing they fitted my sizing mandrel as a size 5.  Metal clay shrinks in strange ways sometimes when you build boxes.  After sanding flush the ring is a 6.  The shape of the ring would make it difficult to beat on a mandrel to make it any larger but in theory the ring could be stretched but I do not plan to try.  I am thinking about using ring plugs more often since I have had several rings shrink well past the size I had planned.

This photo is also taken by Kevin May.  I have created a series of 4 pieces with a seasonal theme.  This piece is winter and depicts a naked tree in a stark winter nighttime landscape.  I applied patina to the night sky and some of the solution may have crept under the stones which makes them look cloudy.  I am not sure how to remove the residue without damaging the patina.  So this piece is not ready for sale until I work out how the stones can look sparkly and the background can look dark at the same time.

I have many more photos to work with now and am quite excited to post them over the coming weeks.  If any of you are interested in Kevin’s photography here is his blog.  He is quite well rounded, having done a lot of work for Caterpillar and also landscapes and macro photography.

Near the end of the year in 2011 sterling silver metal clay was introduced.  I have been working with fine silver metal clay for some time now and love it.  I wondered how the sterling version would behave so I purchased some.  I have made just one piece with sterling PMC.  The photo above shows the new ring “Zen Gazing Disc Ring”.  The design was somewhat inspired by a ring I made a long time ago entitled “Portable Zen Rock Garden”.  The differences between the two rings are vast.  This new ring has a larger focal element.  Sterling is stronger when work hardened than fine silver so I was able to make this ring shank quite thin.  The original ring has a pleasing weighty feel however and there are certainly pros and cons to both fine silver and sterling.  The sterling clay behaved for me the way I hoped it would, a lot like fine silver clay does.  The only challenge I encountered making this ring regards shrinkage of the piece during firing.  The stated shrinkage is higher than that of PMC3 and others have reported that rings lost about 3 sizes.  I made this ring 3 sizes too large for my middle finger.  After firing it does not fit on my middle or ring finger and it measures almost 4 sizes smaller than the dry piece had prior to firing.  I will have to take this into account when I design future rings.

 

On another subject, I have joined a group on Flickr this year entitled Four a Month and it is moderated by the fantastic and creative Lora Hart.  I am posting my first four pieces starting today and continuing over the next few days.  The idea behind the group is that the four pieces we make and post each month will all have a theme or unifying element about them.  Lora has allowed for a great deal of freedom regarding what can qualify as a foursome.  For my first set I chose butterflies.  Below you will find a monarch inspired butterfly in fine silver with a necklace bail in the body of the butterfly.  I have made a couple of other butterflies like it in the last year and they have been extremely warmly received.  I do adore everything butterflies stand for, metamorphosis, grace, beauty, flight, rising above ones limitations to name a few.  One woman told me she believes butterflies are the embodiment of the spirits of our lost loved ones.  All four of the butterflies are made and finished at this point.  I am working with some new photography equipment and software and two of the four will require me to spend more time with this new equipment so that I can produce nice photos.  The next four pieces will be based on the four seasons theme and I have already made those as well.  After those I will be presenting a series of four pieces based on box structures.  I have made three of the four and the remaining piece, a ring with a stone set in it, remains as greenware tidbits on my bench.

Luthy Botanical Gardens is having an auction tomorrow.  A variety of artists have entered works in this event including me.  I delivered a dozen pieces today and spoke at some length with Ann Kizer who is organizing this event.  The auction is tomorrow (Saturday January 28th) and begins at 1pm.  There is an announced auction first and then later on there will be a silent auction.  She placed two of my pieces in the announced portion of the auction.  It looks to be a great auction with some stunning work in a wide variety of media.  You local folks should check it out!